Skip to content
FixingBook
Sign In
Verifiedadvancedest. 30 minutes

Fix MEMORY_MANAGEMENT BSOD (Stop Code 0x0000001A)

A blue screen error caused by severe memory management issues, often related to faulty RAM or bad drivers.

bsodmemory-managementramstop-code0x0000001A

Confirmed working on: Windows 10 · Windows 11

Before you begin

Match the environmentUse this guide only for Windows 10, Windows 11 or a clearly compatible setup.
Protect recoveryBack up important data and save encryption or account recovery keys before changing system state.
Know when to stopThis guide includes advanced changes. If the device contains irreplaceable data or belongs to an employer, stop and use a qualified technician.

Problem overview

The MEMORY_MANAGEMENT stop code 0x0000001A indicates severe memory corruption. Windows halts the system to prevent data loss when it detects a critical discrepancy in system memory.

Common causes

  • Faulty or failing RAM sticks
  • Outdated or incompatible device drivers
  • Corrupted Windows system files
  • Incorrect voltage or timing settings in the BIOS

Solution 1: Check memory hardware

  1. Power off your computer and unplug it from the wall.
  2. Open the computer case.
  3. Remove all RAM sticks and gently clean the gold contacts with a dry microfiber cloth.
  4. Reseat the RAM sticks firmly into their slots.
  5. Boot the computer and check if the error returns.
Expert Tip

If you have multiple RAM sticks, test them individually. Run the system with one stick at a time to isolate the faulty module.

Solution 2: Run Windows Memory Diagnostic

  1. Press the Windows key and type mdsched.exe.
  2. Click Windows Memory Diagnostic.
  3. Select Restart now and check for problems.
  4. Allow the tool to scan your memory during the reboot.
  5. Review the results in the Event Viewer under the System log after Windows loads.

Solution 3: Repair system files and roll back drivers

  1. Open Command Prompt as an administrator.
  2. Run the Deployment Image Servicing and Management tool:
DISM /Online /Cleanup-Image /RestoreHealth
  1. Run the System File Checker:
sfc /scannow
  1. Open Device Manager, right-click your display adapter, select Properties, and go to the Driver tab.
  2. Click Roll Back Driver if you recently updated your graphics driver before the crashes started.
Critical

If you cannot boot normally, enter Safe Mode before attempting to repair system files or uninstalling drivers. Continued crashes during repair can cause permanent data loss.

Confirm the result

  1. Repeat the exact action that originally triggered the problem.
  2. Confirm the original error or symptom is gone and no new warning has appeared.
  3. If the guide changed a driver, service, package, or system setting, restart once and test again.
  4. If the result is worse or unexpected, stop. Reverse only the last change using its documented restore option; if none is documented, use your backup or qualified support.

Questions about this fix

Does this error always mean my RAM is physically broken?

No. Faulty drivers or corrupt system files can also trigger this stop code.

Will the Windows Memory Diagnostic fix the issue?

The diagnostic tool only detects errors. If it finds hardware problems, you must replace the faulty RAM stick.

Did this fix work for you?

Weighted Consensus Protocol

Consensus0%
Required100% (Weight 3)
Contributors0
Verified By YouNo
Your Weight--

Did this solution resolve your issue?

Confirming if this works strengthens verification statistics on the registry.

Sign In to VerifySign in required to verify

FixingTeam10,000 rep

Official Project Maintainers

The core engineering and moderation team behind FixingBook. We curate, verify, and maintain the standards of the troubleshooting ledger.

Spotted something outdated? Suggest an edit. Maintainers review submissions within 48 hours.
Share:XReddit

Discussion (0)

No comments yet. Share your experience or verify if this fixed your issue!

Join the Discussion